Print
Diaphragm single stage automatic switchover board with manual reset & with integrated outlet pressure regulator – CC285/CC385
CC285 - CC385 switchover board for specialty gases is a switchover board allowing continuous gas supply thanks to a reliable automatic switching mechanism with manual reset. It is ideally suited for many high pressure sources of high purity non-corrosive gases with low flow (up to 25 Nm3/h). The dedicated to the supply of gas to analyzers and to the creation of controlled atmosphere in laboratories, control units, and for petrochemical applications. The CC285 - CC385 benefits from a second regulation with an integrated outlet pressure regulator. Thanks to the flexible and modular configuration of the switchover board, it is possible to manage inlet source, purging, outlet regulation and outlet shut-off functions.
Key advantages
  • The semi-automatic switch over board insures a continuous gas supply without gas interruption
  • Ready to install thanks to pre-mounted components on a panel
  • Can be equipped with a collection tube on the relief valve and purge outlet
  • Easy handling thanks to visible technical drawings with key functionalities marked on the back plate
  • Can be equipped with or without outlet shut-off valve and purging valves
  • Using contact gauges or pressure sensor, the switchover board can also be connected to an alarm box to indicate the source status
  • To connect up to 6 cylinders on each side you can use Rotarex extensions

Specifications
Inlet / outlet ports1/4 NPT Other connections available on request
O-ringEPDM - standard FPM
DiaphragmHastelloy®
Leak rate10-8 mbar ℓ/s He
Temperature range-20 to +60 °c
Nominal flow10 Nm3/h (N₂) depending on outlet pressure
Gauges1/4 NPT
Inlet pressure230/300 bar
Outlet Pressure1.5/5.5/10 bar
Oxygen useOnly with brass and inlet pressure 230 bar
Dimensional drawings
Drawing
Product Configurator
 
Body material
Inlet pressure
Outlet Pressure
Outlet valve
Purge
Measurement
Sensors
Configurations
Gas*
CC
CB
285
1.5
V
P
M63
HP
S
N2
 
Chrome plated brass
CB
Stainless steel
SS
Raw brass
RB
230 bar 3335 psig
285
300 bar 4350 psig
385
1,5 bar 22 psig
1.5
5,5 bar 80 psig
5.5
10 bar 145 psig
10
Outlet valve 1/4 NPT
V
None
0
With purge valves
P
Without purge valves
0
Pressure gauge (63 mm)
M63
Contact gauges HP (50 mm)
CGH50
Contact gauges LP (50 mm)
CGL50
Contact gauges LP+HP (50 mm)
CGHL50
Pressure sensor HP
HP
Pressure sensor LP
LP
Pressure sensor HP+LP
HLP
None
0
Standard
S
Collected safety relief valve and purge
CL
N₂
N2
Ar
Ar
O₂
O2
CO₂
CO2
N₂0
N2O
He
He
H₂
H2
Downloadable catalogs, brochures
  • Download
    Supply and Switchover Boards
    Last update: Jun 28, 2023
    Available in: en
Connect with an Expert
×
Loading

This site uses cookies.

Rotarex uses cookies to ensure a better and easier online experience. Please click here to accept the continued use of these cookies after reading our revised COOKIES POLICY.

Please note, you may continue to use the website even if you do not accept the use of cookies. However, the visitor experience on subsequent visits will be diminished.

Read the full COOKIES POLICY.

Refuse all non essential cookies