Body material | Version type | Outlet Pressure | End connections | O-ring material | Gauges | Outlet valve | Configuration |
TDL | 102 | 10 | G | EPDM - standard | 1 | NV | A |
Diaphragm single stage automatic switchover board with manual reset - TD102
The TDL102 switchover board is ideally suited for corrosive gases and high purity applications for low flow applications. The device is dedicated to the supply of gas to analyzers and to the creation of controlled atmosphere in laboratories, control units.
Key advantages
- Possible to connect up to 6 cylinders without using the purge line
- Maintains purity: eliminates cross-flow mixing of supply sources
- Ready to install with all components are mounted on a board
- Can be equipped with a collectable tube on the relief valve and purge outlet
- Can also be equipped with an outlet shut-off valve
- Using contact gauges, the switchover board can also be equipped with an alarm box to indicate the source status
- Ammonia version available on demand
FLOW CURVES
Specifications
Female ports | G 3/8 (inlet/outlet) or 1/4 NPT (inlet/outlet) |
Seat seal | PCTFE |
O-ring | EPDM - standard FPM |
Diaphragm | Hastelloy® |
Weight | ± 15,0 kg |
Temperature range | -20 to +60 °c |
Gauges | High and low pressure (M10 x 1 or 1/8 NPT) |
Inlet pressure | 200 bar, NH3 : 8 bar |
Outlet Pressure | 10/25/50 bar, NH3 : 3 bar |
Oxygen use | No |
Leak rate | 10-8 mbar ℓ/s He |
Nominal flow | 10/10/50 Nm3 /h (N2) NH3 : 5 Nm3 /h (NH3) |
Product Configurator
Downloadable catalogs, brochures
Connect with an Expert