Inlet pressure | Outlet Pressure | Body material | End connections | O-ring material | Gauges | Fix or adjustable outlet pressure | Oulet valve | Configuration | ||
MOD | 200 | F | 16 | L | G | EPDM | 1 | ADJ | NV | A |
Diaphragm supply board with balanced valve for food industry - MOD200 F
MOD200 F supply board is compliant with EC 1935/2004 food regulation, with full compatibility of materials. It should be used in combination with a switchover board for the regulation of the emergency source during maintenance on the principal source. This avoids installing extensions and reduces the amount of leaking points.
Key advantages
- Outstanding pressure consistency with Balanced Valve Technology.
- Ready to install for better productivity: all components are pre-mounted on the mounting panel
- Acetylene and Propane versions available
- Compliant with EC 1935/2004 regulation
- Non-whipping filter improves safety of the operator during the cylinder replacement
- Can be connected to an alarm box using contact gauges
FLOW CURVES
Specifications
| Female ports | In: G 3/8 M Out: G 3/8 M |
| Seat seal | PCTFE |
| O-ring | EPDM |
| Diaphragm (regulator) | AISI 304 or Hastelloy® |
| Weight | ± 6,0 kg |
| Temperature range | -20 to +60 °c |
| Gauges | High and low pressure (M10 x 1 or G 1/4) |
| Inlet pressure | 200 bar 2900 psi |
| Outlet Pressure | 16/50 bar |
| Nominal flow 200 bar version | 70/150 Nm3 /h (N2) |
| Leak rate | w/o outlet valve: 1.10-8 mbar ℓ/s He |
Dimensional drawings
Product Configurator
Downloadable catalogs, brochures
Related Products
Connect with an Expert
