Piston single stage supply board - CM454

CM454 is a supply board ideally suited for pure gases for high purity applications to put vessels under pressure and for leak detection and purge of pipe work. The device is to be used in combination with a switchover board for the regulation of the emergency source during maintenance on the principal source. This avoids installing some extension and reduces the amount of leaking points.

Key advantages

Possible to connect up to 3 cylinders without using the purge line
Ready to install for better productivity: all components are pre-mounted on the mounting panel
Connectable to an alarm box using contact gauges
Equipped with a ¼ turn shut-off valve on the outlet
Collection tube available on the relief valve and purge outlet
Downstream regulation system can be decompressed by turning the hand wheel counter-clockwise

Contact an expert
Configure product
Download datasheet

FLOW CURVES

Product image

Specifications

Female ports	G 3/8 (inlet/outlet)
Seat seal	PCTFE
O-ring	EPDM - standard FPM
Piston	AISI 316L
Weight	± 4,5 kg
Temperature range	-20 to +60 °c
Gauges	High and low pressure (M10 x 1)
Inlet pressure	200 bar
Outlet Pressure	160 bar
Oxygen use	OK for brass with 200 bar inlet pressure
Leak rate	10^-8 mbar ℓ/s He
Nominal flow	30 Nm³ /h (N2)

Dimensional drawings

Product Configurator

Body material	Outlet Pressure	End connections	O-ring material	Gauges	Configuration
CML	454	G	EPDM	1	A
Chrome Plated Brass CML	160 bar 2320 psig 454	G 3/8 - Female G 1/4 NPT N		with gauges - standard 1 with HP inductive contact gauge 2	Standard Configuration A with connected purge and relief valve CL

I am interested

Downloadable catalogs, brochures

Supply and Switchover Boards

Last update: Aug 05, 2024
Available in: en