Working pressure | Gas type | Safety | Safety set up | Body material | Actuation | Inlet | Outlet | Pin length | Reference point | Dip tubes | Gas type | |
C5 | 6 | 0 | 8 | 190 | L | A | 12N | 40 | 15 | F | F | CO2 |
STANDARD RPV VALVES Y TYPE - C560
The C560 a dual ported brass cylinder valves with residual pressure device for industrial CO2, Inert, Mixtures and flammable gases. The both outlets of the valve allow extracting either gaseous or liquid phase from the cylinder.
Key advantages
- High pressure brass cylinder valve Y type for Inert, Inert mixtures and flammable gas service
- Permanent gas tight seal
- Specific filling adaptor required
- Residual pressure valve offline execution
- π marking according TPED directive
- Tested according EN ISO 10297 and ISO15996 standards
Specifications
| Working pressure pmax. | 200 bar |
| Gas type | Inert & flammable |
| Seat orifice size | 4 Mm |
| Cv | 0,3 |
| Safety | Yes |
| Temperature range | -20 to +65 °c |
| Helium leak rate at pmax. | Internal 10-3 mbarl/sec External 10-3 mbarl/sec |
| Material | Handwheel: aluminium Seat: PA 6.6 O-rings: EPDM Body: brass |
| In- and outlet connections | In accordance with all country standards |
Dimensional drawings
Product Configurator
Downloadable catalogs, brochures
Related Products
«
»
-
Residual pressure valve
O2, N2O
Max. Inlet pressure: 200 bar -
RPV Small cone
O2 and inert
Max. inlet pressure: 200 bar -
RPV Small cone
O2 and N2O
Max. Inlet pressure: 200 bar -
Residual Pressure Valves
Inert, mixtures and flammable
Max. inlet pressure: 200 bar -
RPV Small cone
Inert, flammable
Max. Inlet pressure: 200 bar -
Residual pressure valve
CO2
Max. Inlet pressure: 200 bar -
RPV Small cone
CO2
Max. Inlet pressure: 200 bar
Connect with an Expert
